CHEVROLET/GMC 4 WHEEL DRIVE TRUCK, BLAZER, DENALI AND SUBURBAN

Chevrolet and GMC have used several different drive shafts from the factory over the years. Please follow the below information and/or our measuring guide to help determine which drive shaft you will need.

FRONT DRIVE SHAFTS

Type A drive shaft with standard spline
Figure 1: Type A drive shaft with standard spline $269.00 with X spline, $299.00 using 1310 series u-joints. Measure as per Figure 5.
Type A drive shaft with flange
Figure 2: Type A drive shaft with flange at C.V. end with standard spline $319.00 with X spline, $349.00 using 1310 series u-joints. Measure as per Figure 6.
Type B drive shaft with standard spline
Figure 3: Type B drive shaft with standard spline $189.00 with X spline, $219.00 using 1310 series u-joints. Measure as per Figure 5.
Type B drive shaft with flange and 3R series u-joints with standard spline
Figure 4: Type B drive shaft with flange and 3R series u-joints with standard spline, $279.00 with X spline $299.00. Measure as per Figure 6.

Measure for Length

Example 2
Figure 5: Fixed yoke to fixed yoke
Example 2
Figure 6: Flanged yoke to fixed yoke
Spline/Slip Yoke Differences
Figure 7: Spline/Slip Yoke Differences

AUTOTRAC FRONT DRIVE SHAFT

Type C Drive shaft (With Male spline)
Figure 8: Type C Drive shaft (with male spline)
original drive shaft and the replacement drive shaft
Figure 9: If Figure 8 is correct, this figure shows the original drive shaft and the replacement drive shaft we offer.

The replacement drive shaft is $459.00. Once the product is ordered, it will ship the following business day. We pay freight (UPS Ground, lower 48 states). However, we do add on a $10.00 packaging & processing charge.

measurement
Figure 10: We will need a length measurement as is represented
Click here for the Measuring Guide

REAR DRIVE SHAFTS

Please note we cannot build drive shafts longer than 75 also, we do not build Aluminum or build and balance 2 Piece type drive shafts with the carrier bearing.

STOCK EXAMPLES

original drive shaft and the replacement drive shaft
Figure 11: Type B Drive shaft. Prices start at $259.00 using 1310 series u-joints. If using different size u-joints call for price.
original drive shaft and the replacement drive shaft
Figure 12: Type C Drive shaft (with reverse slip yoke, female). Prices start at $279.00 using 1310 series u-joints. If using different size u-joints call for price.

Once you have measurements and dimensions call for price.

Measure for length by attachment
Figure 13: Measure for length by attachment
Proper geometry for a CV drive shaft
Figure 14: Proper geometry for a CV drive shaft
Proper geometry for a conventional two joint drive shaft
Figure 15: Proper geometry for a conventional two joint drive shaft

Note: Most drive shafts shown in photos are polished and clear coated, this finish adds $25 the cost. We only recommend the polish & clear coat for show vehicles or very dry climates.
Free Shipping - click here for more information
Questions? Give us a
call!

| Tom Wood's Custom Drive Shafts |
Copyright © 1999-2017

Disclaimer
We reserve the right to change prices, or not sell an item, due to error in pricing.

[HOME] Tom Wood's Custom Drive Shaft's [HOME]