Ford Excursion & Expedition

Ford Excursionís & Expeditionís used different types of drive shafts both front and rear from the factory. We will need you to measure for dimensions so we can build the drive shaft. Depending on the type of drive shaft the vehicle is running the price on the front will vary.

FRONT

Front drive shafts will start out at $299.00 for Type B Drive shafts and $429.00 on Type A Drive Shafts.

Type B Drive Shaft
Figure 1: Type B Drive Shaft
Type A Drive Shaft
Figure 2: Type A Drive Shaft

Double Cardan C.V. (Type A: Driveshaft with two u-joints at the transfer case and a single u-joint at the differential). The price will start at $269.00 and go up to $449.00.

Double Cardan C.V.
Figure 2: Double Cardan C.V.

MEASURE FOR LENGTH, FLANGE PATTERNíS AND/OR U-JOINT SIZES

Measure for length
Figure 3: Measure for length
Measure A, B, C1 & C2 Dimensions for flange.
Figure 4: Measure A, B, C1 & C2 Dimensions for flange.
End Yokes & Universal Joints
Figure 5: End Yokes & Universal Joints

Click here for the Measuring Guide

If the vehicle is highly modified we will need more information to make sure we can build what you need.

REAR

Rear drive shaft will start out at $429 and go up to $589.00.

Figure 6:
Figure 7:

We will need to know length, flange patterns and/or u-joint sizes in order to build the drive shaft.

When you have the measurements from the guide please call for exact prices.

If the vehicle is highly Modified we will need more information to make sure we can build what you need.

A131XC shaft
Figure 5:
A3F4F4 shaft
Figure 6:

If the vehicle is highly Modified we will need more information to make sure we can build what you need.

Click here for the Measuring Guide

Measure Length

Figure 7:

Measure Flange Pattern

Measure Flange Patterns
Figure 8: Measure Flange Patterns
End Yokes & Universal Joints
Figure 9: End Yokes & Universal Joints
Proper geometry for CV Drive Shaft
Figure 10: Proper geometry for CV Drive Shaft
Proper geometry for Conventional Two Joint Drive Shaft
Figure 11: Proper geometry for Conventional Two Joint Drive Shaft

Note: Most drive shafts shown in photos are polished and clear coated, this finish adds $25 the cost. We only recommend the polish & clear coat for show vehicles or very dry climates.
Free Shipping - click here for more information
Questions? Give us a
call!

| Tom Wood's Custom Drive Shafts |
Copyright © 1999-2017

Disclaimer
We reserve the right to change prices, or not sell an item, due to error in pricing.

[HOME] Tom Wood's Custom Drive Shaft's [HOME]