Ford Trucks

Please note we do have length restrictions on building some drive shafts. Our equipment is custom length so we cannot build 2 piece drive shafts with the Carrier Bearing or Anything over 75 in length.

Ford Trucks have used many different types of drive shafts and many different sizes of u-joints over the years. We will need measurements and dimensions in order to build what you need. Please follow below instructions or our Measuring Guide.

Click here for the Measuring Guide

F150 FRONT

Prices for front drive shafts will start at $189.00 for a Type B drive shaft running 1310 series u-joints. Larger size u-joints and Type A Double Cardan drive shafts will be more.

Type A Drive Shaft
Figure 1: Type A Drive Shaft
Type B Drive Shaft
Figure 2: Type B Drive Shaft
Measure fixed yoike to fixed yoke
Figure 3: Measure fixed yoike to fixed yoke

Newer Ford F-150 front drive shafts were Rezeppa type drive shafts.

NEWER STOCK F-150 FRONT DRIVE SHAFT
Figure 4: NEWER STOCK F-150 FRONT DRIVE SHAFT

We can build a replacement drive shaft using 1310 series u-joints. We machine a Billet Aluminum Adapter that bolts to the stock output flange on your Transfer case since this cannot be changed. You will need to replace the Stock Pinion flange with the standard 8.8 Pinion flange. Please measure for length.

Measure length
Figure 5: Measure length
DOUBLE CARDON DRIVE SHAFT
Figure 6: REPLACEMENT FRONT DOUBLE CARDON DRIVE SHAFT. $389.00
ALUMINUM ADAPTER FOR T-CASE
Figure 7: ALUMINUM ADAPTER FOR T-CASE. $100.00

SUPER DUTY FRONT DRIVE SHAFT. 1999+ F-250 & F-350


FRONT Drive Shaft

Front drive shaft
Figure 8: Front drive shaft. Starting at $429.00
Please measure for length.
Figure 9: Please measure for length.

If the vehicle is highly modified, we will need more information to make sure we can build what you need.

REAR Drive Shaft

Please note we do have length restrictions on building some drive shafts. Our equipment is custom length so we cannot build 2 piece drive shafts with the Carrier Bearing or Anything over 75 in length.

Rear drive shaft
Figure 10: Prices for the Rear drive shaft will start at $259.00 for a Type B drive shaft running 1310 series u-joints.
1350 series drive shaft
Figure 11: 1350 SERIES C.V. DRIVE SHAFTS STARTING AT $429.00 AND UP.

Once you have followed our measuring guide and have the information please call for current prices.

Click here for the Measuring Guide

Click here for Slope vs Angles

EXAMPLES OF HOW TO MEASURE FOR LENGTH

EXAMPLES OF HOW TO MEASURE FOR LENGTH.
Figure 12: EXAMPLES OF HOW TO MEASURE FOR LENGTH.
Measure A, B, C1 & C2 Dimensions for flange.
Figure 13: Measure A, B, C1 & C2 Dimensions for flange.
End Yokes & Universal Joints
Figure 14: End Yokes & Universal Joints
Proper geometry for Conventional Two Joint Drive Shaft
Figure 15: Proper geometry for Conventional Two Joint Drive Shaft
Proper geometry for CV Drive Shaft
Figure 16: Proper geometry for CV Drive Shaft

Note: Most drive shafts shown in photos are polished and clear coated, this finish adds $25 the cost. We only recommend the polish & clear coat for show vehicles or very dry climates.
Free Shipping - click here for more information
Questions? Give us a
call!

| Tom Wood's Custom Drive Shafts |
Copyright © 1999-2017

Disclaimer
We reserve the right to change prices, or not sell an item, due to error in pricing.

[HOME] Tom Wood's Custom Drive Shaft's [HOME]