FULL SIZE BRONCO

The full Size Bronco has used many different size u-joints and attachments both for the Front and Rear Drive shafts. We will need you to follow our measuring guide in order for us to build the correct drive shaft.

FRONT

Type B: drive shaft with a single universal joint on each end. The price will start at $189.00 for a Type B drive shaft using 1310 series u-joints.

Type B drive shaft using 1310 series u-joints
Figure 1: Type B drive shaft using 1310 series u-joints

Double Cardan C.V. (Type A: Driveshaft with two u-joints at the transfer case and a single u-joint at the differential). The price will start at $269.00 and go up to $449.00.

Double Cardan C.V.
Figure 2: Double Cardan C.V.

MEASURE FOR LENGTH

Measure for length
Figure 3: Measure for length
Spline/Slip Yoke Differences
Figure 4: Spline/Slip Yoke Differences

REAR

The rear would use the Type A Double Cardan C.V. and could possibly use flanges on one or both ends. The price on these will start at $269.00 and go to $479.00 for standard replacement drive shafts. Some drive shaft could be more depending on what is needed.

A131XC shaft
Figure 5: A131XC shaft
A3F4F4 shaft
Figure 6: A3F4F4 shaft

If the vehicle is highly Modified we will need more information to make sure we can build what you need.

Click here for the Measuring Guide

Measure for u-joint dimensions

Measure End Yokes & Universal Joints
Figure 7: Measure End Yokes & Universal Joints

Measure for Length

Fixed Yoke to Fixed Yoke
Figure 8: Fixed Yoke to Fixed Yoke
Flanged Yoke to Flanged Yoke
Figure 9: Flanged Yoke to Flanged Yoke

Measure Flange Patterns

Measure Flange Patterns
Figure 10: Measure Flange Patterns
Proper geometry for Conventional Two Joint Drive Shaft
Figure 11: Proper geometry for Conventional Two Joint Drive Shaft
Proper geometry for CV Drive Shaft
Figure 12: Proper geometry for CV Drive Shaft

Note: Most drive shafts shown in photos are polished and clear coated, this finish adds $25 the cost. We only recommend the polish & clear coat for show vehicles or very dry climates.
Free Shipping - click here for more information
Questions? Give us a
call!

| Tom Wood's Custom Drive Shafts |
Copyright © 1999-2017

Disclaimer
We reserve the right to change prices, or not sell an item, due to error in pricing.

[HOME] Tom Wood's Custom Drive Shaft's [HOME]