WK Jeep Grand Cherokee

FRONT DRIVE SHAFTS

We build a double cardan drive shaft to replace the stock drive shaft. This drive shaft uses 1310 series u-joints using Spicer Non Greaseable U-Joints. The drive shafts come painted Black.

Rezeppa to flange
Figure 1: Stock Drive shaft: Rezeppa to flange
Rezeppa to Rezeppa
Figure 2: Stock Drive shaft: Rezeppa to Rezeppa

New Replacement Drive Shafts

AXCF1F1 shaft
Figure 3: FLANGED CONVENTIONAL DOUBLE CARDAN
AXCF shaft
Figure 4: FLANGED CONVENTIONAL DOUBLE CARDAN

Drive shaft is $469.00

Multiple Double Cardan.

Alternatively, if you have more than 4 of lift and or want the smoothest possible configuration, we would suggest our multiple double cardan drive shaft (4 U joints). This drive shaft can only be built with our S spline. The cost for these shafts are $569.00 to $719.00 depending on flanges.

Measure Rezeppa to Flanged Yoke
Figure 5: AA2S-F1-F1 drive shaft

 

MEASURE FOR LENGTH

Measure Rezeppa to Flanged Yoke
Figure 6: Measure Rezeppa to Flanged Yoke
Measure rezeppa to rezeppa
Figure 7: Measure Rezeppa to Rezeppa

If using a 4 Bolt flange we will also we will need to know flange dimensions from the differential end. Please measure the A, B, C1 & C2 Dimensions so we can build the drive shaft with the correct flange yoke.

Flange measurements
Figure 8: Flange measurements