Measuring Your Ford Excursion & Expedition Drive Shafts

Measuring Your Ford Excursion & Expedition Drive Shafts

Ford Excursion’s & Expedition’s used different types of drive shafts both front and rear from the factory. We will need you to measure for dimensions so we can build the drive shaft. Depending on the type of drive shaft the vehicle is running the price on the front will vary.

Front

Front drive shafts will start out at $309.00 for Type B Drive shafts and $489.00 on Type A Drive Shafts.

Type B Drive Shaft

 

Type A Drive Shaft

Double Cardan C.V. (Type A: Driveshaft with two u-joints at the transfer case and a single u-joint at the differential). The price will start at $349.00 and go up to $549.00.

MEASURE FOR LENGTH, FLANGE PATTERN’S AND/OR U-JOINT SIZES

 

 

Measure A, B, C1 & C2 Dimensions for flange.

 

End Yokes & Universal Joints

If the vehicle is highly modified we will need more information to make sure we can build what you need.

REAR

Rear drive shaft will start out at $449 and go up to $649.00.

Figure 6:

 

Figure 7:

We will need to know length, flange patterns and/or u-joint sizes in order to build the drive shaft.

When you have the measurements from the guide please call for exact prices.

If the vehicle is highly Modified we will need more information to make sure we can build what you need.

If the vehicle is highly Modified we will need more information to make sure we can build what you need.

Measure Length

 

Measure Flange Pattern

 

End Yokes & Universal Joints

Proper geometry for CV Drive Shaft

 

Proper geometry for Conventional Two Joint Drive Shaft